Sharp LC-15A2M, Service Manual

Page: 8 / 34

8
LC-15A2M
ADJUSTING PROCEDURE OF EACH SECTION
The best adjustment is made before shipping. If any position deviation is found or after part replace is performed, adjust
as follows.
1. Preparation for Adjustments
(1)Use the exclusive-use AC adapter or stable DC power supply.
AC adapter: UADP-0210CEZZ
DC power supply: 12 ±0.5V
2. Special mode setting procedure
(1)After initialization of E 2 PROM the mode is changed to the adjustment mode.
[Procedure]
Connect TP2001 and TP2002 to GND, and turn on the power.
[Description]
• The initialization of microprocessor is as follows.
• AV position, DAC data, G/A data, sound processor data and video chroma data adjustment values are taken as
defaults.
(2)Adjustment mode
[Procedure]
Make a short-circuit between TP2001 and GND, and turn on the power.
Or make a short-circuit TP2002 to GND, and turn on the power.
Or while holding down the [TV/VIDEO] and [MENU] keys at the same time, turn on the main power, and simultaneously
press the (inspection process) [CH
"
] and [VOL– ] keys to change the mode to the adjustment mode.
[Description]
The manual adjustment or adjustment through communication with the automatic machine is performed.
(3)Inspection mode
[Procedure]
While holding down the [TV/VIDEO] and [MENU] keys at the same time, turn on the power.
[Description]
• In the ordinary menu select “VIDEO ADJUST” with the [CH] key, and decide with the [VOL] key. Then select
“PICTURE”, “TINT (only NTSC)”, “COLOR”, “BLACK LEVEL”, “SHARPNESS”, “RED-BLUE”, “GREEN” and
“COLOR SYSTEM” with the [CH] key, and decide with the [VOL] key. After that, adjust values with the [VOL] key.
• VOLUME, PICTURE, TINT (only NTSC), COLOR, BLACK LEVEL, SHARPNESS, RED-BLUE, GREEN change
as follows.
(4)Shipping setting mode
[Procedure]
While holding down the [TV/VIDEO] and [MENU] keys at the same time, turn on the main power, and simultaneously
press the (inspection process) [CH
'
] and [VOL+] keys to change the mode to the adjustment mode.
[Description]
User adjustment and other values are taken as defaults.
If TV is indicated as SETTING COMPLETE, setting has been completed.
û
Min.
Û û
Center
Û û
Max.
Û