background image

1

LC-13B2UA

SHARP CORPORATION

S22G1LC13B2UA

LCD COLOR TELEVISION

SERVICE MANUAL

MODEL

LC-13B2UA

In the interests of user-safety (Required by safety regula-
tions in some countries) the set should be restored to its
original condition and only parts identical to those specified
be used.

Page

»

IMPORTANT SERVICE SAFETY PRECAUTION ................................................................................. 2

»

SPECIFICATIONS ................................................................................................................................ 5

»

OPERATION MANUAL ......................................................................................................................... 6

»

DIMENSIONS ....................................................................................................................................... 7

»

REMOVING OF MAJOR PARTS .......................................................................................................... 8

»

ADJUSTING PROCEDURE OF EACH SECTION ............................................................................. 11

»

TROUBLE SHOOTING TABLE ........................................................................................................... 22

»

CHASSIS LAYOUT ............................................................................................................................. 26

»

BLOCK DIAGRAMS ............................................................................................................................ 28

»

DESCRIPTION OF SCHEMATIC DIAGRAM ..................................................................................... 30

»

SCHEMATIC DIAGRAMS ................................................................................................................... 31

»

PRINTED WIRING BOARD ASSEMBLIES ........................................................................................ 46

»

PARTS LIST

Ë

ELECTRICAL PARTS ..................................................................................................................... 52
MAIN UNIT ..................................................................................................................................... 52
TERMINAL UNIT ............................................................................................................................ 56
CONTROL UNIT ............................................................................................................................ 58
LED UNIT ....................................................................................................................................... 59
INVERTER UNIT ............................................................................................................................ 59

Ë

CABINET PARTS LIST ................................................................................................................... 60

Ë

SUPPLIED ACCESSORIES PARTS .............................................................................................. 60

Ë

PACKING PARTS ........................................................................................................................... 60

Ë

CABINET AND MECHANICAL PARTS .......................................................................................... 61

»

PACKING OF THE SET ...................................................................................................................... 62

 CONTENTS

This document has been published to be used for
after sales service only.
The contents are subject to change without notice.

SERVICE MANUAL

LCD COLOR TELEVISION

MODELS LC-13B2UA

Summary of Contents for LC-13B2UA

































































Reviews: