manualshive.com logo in svg

Sharp ER-A411, Full Detailed Instruction Manual

Share
Download
Sharp ER-A411 Full Detailed Instruction Manual Download Page 23

23

Item Selection from the Menu

Your register allows you to select functions from a menu. For example, if you want to enter an item for check 
1 sale, select the option “CHECK” from the check menu instead of pressing the 

 key.

Each menu can be opened as follows:

• Cash menu*

• Percent menu

 

➔

Q

 

➔

• Check menu*

• Discount menu

=

 

➔

 

➔

• Credit menu*

• Function menu

<

 

➔

CREDIT6 through 9 are also available in 
this menu.

F

 

➔

PO, PO2, NO SALE are also available 
in this menu.

• Exchange menu*

• Payment menu

>

 

➔

u

 

➔

*  

These menus can be also opened by selecting the corresponding menu from the payment menu.

Procedure

Press the corresponding menu key (ex. 

=

 ). The menu list is displayed.

Use one of the following ways:
• Move the cursor to the desired option by using the 

|

 or 

I

 key, and press the 

E

 key.

• Enter the desired option number by using a numeric key and press the 

E

 key.

For menus except Function menu and Payment menu, the following procedure can be also used.
Press a menu number key 

fi

 rst, and then press a menu key.

Example) To select CREDIT2, press the 

2

 key (numeric key) and then press the 

<

 key.

Summary of Contents for ER-A411



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands