manualshive.com logo in svg

Sharp ER-A411, Full Detailed Instruction Manual

Share
Download
Sharp ER-A411 Full Detailed Instruction Manual Download Page 175

175

Message Programming

Use the following procedure to select any option included in the message group:

Procedure

▼

1.

 In the SETTING window, select “12 MESSAGE”.

• The MESSAGE window will appear.

2. 

 Select any option from the following options list:

1 RECEIPT LOGO

Receipt logo

2 E.BILL MESSAGE

Entertainment bill message

3 SCROLL MESSAGE

Scrolling message for customer 
display

The following illustration shows those options included in this programming group.

12 MESSAGE

1 RECEIPT LOGO

l

See “Receipt logo” on page 175.

2 E.BILL MESSAGE

l

See “Entertainment bill message” on page 176.

3 SCROLL MESSAGE

l

See “Scrolling message for customer display” 
on page 176.

 

■

  Receipt logo

Your register can print programmed messages for customers on every receipt.
The logo text is printed in a centering form on the receipt.

Procedure

Program each item as follows:

• RECEIPT LOGO (Use the character entry)

Logo text for the receipt (max. 30 characters x 6 lines)

NOTE

The register provides the following patterns of receipt logo, and the default is the pattern 6.
At the default, the 

fi

 rst 3 lines are used as header, and the last 3 lines are used as footer.

Pattern 1: 3 line text header
Pattern 2: Image logo header
Pattern 3: Image logo 3 line text footer
Pattern 4: 6 line text header
Pattern 5: Image logo 3 line text header
Pattern 6: 3 line text 3 line text footer

To change the receipt logo pattern, consult your authorized SHARP dealer.
Some programmed text may not be printed depending on the pattern.

Summary of Contents for ER-A411



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands