manualshive.com logo in svg

Sharp ER-A411, Full Detailed Instruction Manual

Share
Download
Sharp ER-A411 Full Detailed Instruction Manual Download Page 171

171

 

■

  Z1 General report

Procedure

The screen continues.

• SAVE ALL RAM (Use the selective entry)

YES: Saves the all RAM data in the SD card.
NO:

Does not save the all RAM data in the SD card.

• 0 SKIP SALE DATA (Use the selective entry)

YES: Skip those data that are “0” sales when saving the 

sales data in the SD card.

NO:

Does not skip those data that are “0” sales when 
saving the sales data in the SD card.

• SAVE DEPT DAILY (Use the selective entry)

YES: Saves the department report (daily) in the SD card.
NO:

Does not save the department report (daily) in the SD card.

• SAVE DEPT TERM (Use the selective entry)

YES: Saves the department report (term) in the SD card.
NO:

Does not save the department report (term) in the SD card.

• SAVE PLU DAILY (Use the selective entry)

YES: Saves the PLU report (daily) in the SD card.
NO:

Does not save the PLU report (daily) in the SD card.

• SAVE PLU TERM (Use the selective entry)

YES: Saves the PLU report (term) in the SD card.
NO:

Does not save the PLU report (term) in the SD card.

• SAVE TRNS. DAILY (Use the selective entry)

YES: Saves the transaction report (daily) in the SD card.
NO:

Does not save the transaction report (daily) in the SD card.

• SAVE TRNS. TERM (Use the selective entry)

YES: Saves the transaction report (term) in the SD card.
NO:

Does not save the transaction report (term) in the SD card.

• SAVE CLERK DAILY (Use the selective entry)

YES: Saves the clerk report (daily) in the SD card.
NO:

Does not save the clerk report (daily) in the SD card.

• SAVE CLERK TERM (Use the selective entry)

YES: Saves the clerk report (term) in the SD card.
NO:

Does not save the clerk report (term) in the SD card.

• SAVE CSR DAILY (Use the selective entry)

YES: Saves the cashier report (daily) in the SD card.
NO:

Does not save the cashier report (daily) in the SD card.

• SAVE CSR TERM (Use the selective entry)

YES: Saves the cashier report (term) in the SD card.
NO:

Does not save the cashier report (term) in the SD card.

• SAVE HOURLY (Use the selective entry)

YES: Saves the hourly report in the SD card.
NO:

Does not save the hourly report in the SD card.

Summary of Contents for ER-A411



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands