Sharp ER-A411 Full Detailed Instruction Manual Download

Page: 166 / 226

166

■

Print selection

You can program various printing functions.

Procedure

Program each item as follows:

The screen continues.

• PURCHASE NO. (Use the selective entry)

NO:

Does not print the number of purchases.

YES: Prints the number of purchases.

• TIME PRINT (Use the selective entry)

NO:

Does not print the time on the receipt and journal.

YES: Prints the time on the receipt and journal.

• JOURNAL SEL. (Use the selective entry)

PARTIAL: Prints the information on all entries other than normal department entries (entries into “+”

departments and their associated “+” PLUs) on the journal.

FULL:

Prints the detailed information on the journal.

• JOURNAL TEXT (Use the selective entry)

NORMAL: Prints the normal-size letters on the journal.
SMALL:

Prints the compressed-size letters on the journal.

• R/J -VAT/TAX (Use the selective entry)

NO:

Does not print VAT or tax amounts on the receipt and journal.

YES: Prints VAT or tax amounts on the receipt and journal.

• R/J -TAXABLE (Use the selective entry)

NO:

Does not print taxable amounts on the receipt and journal.

YES: Prints taxable amounts on the receipt and journal.

• R/J -NET (Use the selective entry)

NO:

Does not print net amounts on the receipt and journal.

YES: Prints net amounts on the receipt and journal.

• BILL -VAT/TAX (Use the selective entry)

NO:

Does not print VAT or tax amounts on the bill.

YES: Prints VAT or tax amounts on the bill.

• BILL -TAXABLE (Use the selective entry)

NO:

Does not print taxable amounts on the bill.

YES: Prints taxable amounts on the bill.

• BILL -NET (Use the selective entry)

NO:

Does not print net amounts on the bill.

YES: Prints net amounts on the bill.

• BILL -TIME (Use the selective entry)

NO:

Does not print the time on the bill.

YES: Prints the time on the bill.

• BILL -TABLE# (Use the selective entry)

NO:

Does not print the table number on the bill.

YES: Prints the table number on the bill.

• SEPARATOR LINE (Use the selective entry)

YES: Prints separator lines in the report.
NO:

Creates one-line space instead of printing separator lines in the report.

Summary of Contents for ER-A411



































































































































































































































Search results

Summary of Contents for ER-A411

Reviews:

Related manuals for ER-A411

Brands by name

Popular brands

Sharp ER-A411, Full Detailed Instruction Manual

Search results

Summary of Contents for ER-A411

Reviews:

Related manuals for ER-A411

Brands by name

Popular brands