ELECTRONIC CALCULATOR
电子计算器
EL-364
OPERATION MANUAL
操作手册
PRINTED IN CHINA /
中国印刷
09ET(TINSZ1502EHZZ)
• Do not press too hard against the LCD panel because it
contains glass.
• Never dispose of the battery in a fire.
• Keep battery out of reach of children.
• Please press
if you see no indication.
• Since this product is not waterproof, do not use it or store
it where fluids, for example water, can splash onto it.
Raindrops, water spray, juice, coffee, steam, perspiration,
etc. will also cause malfunction.
• This product, including accessories, may change due to
upgrading without prior notice.
Type:
Electronic calculator
Operating capacity:
12 digits
Power supply:
Built-in solar cell and lithium battery
(3V ... (DC) CR2025 × 1)
Automatic Power-off:
Approx. 7 min.
Operating temperature: 0°C - 40°C (32°F-104°F)
Dimensions:
110 mm (W) × 177 mm (D) × 17.5
mm (H) 4-11/32
"
(W) × 6-31/32
"
(D)
× 11/16
"
(H)
Weight:
Approx. 150 g (0.33 lb.)
(battery included)
Accessories:
Lithium battery
(installed), Operation manual
ENGLISH
BEFORE USE
SPECIFICATIONS
SHARP will not be liable nor responsible for any incidental
or consequential economic or property damage caused
by misuse and/or malfunctions of this product and its
peripherals, unless such liability is acknowledged by law.
• LCD
面板内含玻璃，所以请不要用力挤压
LCD
。
•
请绝对不要将电池投入火中。
•
请将电池放置在小孩所能接触范围之外。
•
如果没有任何显示，请按
。
•
本产品及其附件会因升级而变化，恕不提前通知。
•
因为产品不防水，请不要在液体（如水）能溅到的地方使
用或保存。雨滴、喷水、果汁、咖啡、蒸汽、汗水等也会
造成产品故障。
类型：
电子计算器
计算能力：
12
位数字
电源：
内置太阳能电池和锂电池
(3V ... (DC)
CR2025 × 1)
自动关机：
约
7
分钟
工作温度：
0°C - 40°C (32°F-104°F)
尺寸：
110 mm (W) × 177 mm (D) × 17.5 mm (H)
4-11/32
"
(W) × 6-31/32
"
(D) × 11/16
"
(H)
重量：
约
150 g (0.33 lb.)
（包括电池）
附件：
锂电池
（已安装），操作手册
中文
使用之前
规
格
夏普对本产品和其外设因误用和（或）故障而导致的附带或
间接经济或财产损坏不承担义务或责任，除非法律规定有此
义务。
KICK STAND
支
脚
OPERATIONS
操
作
1. Press
twice to clear any residual values and calculation instructions in the calculator.
2. Upon starting memory calculation, press
to clear the memory. Likewise, preceding grand total calculation, press
twice to clear the grand total memory.
3. The position of any switch that is not specifically designated, may be set to any position.
4. For expressing calculation examples, only the symbols that are required for explanation are mentioned.
5. Example procedures are listed in following manner unless otherwise specified.
(1) Example
(2) Key operations
(3) Display
1.
按
两次清除计算器内任何数值和计算指令。
2.
如果开始记忆计算，请按
清除内存。同样，如果要开始总和计算，按
两次清除总和内存。
3.
未特别设计的开关的位置可以设定为任意位置。
4.
对于表达式计算示例，只有对需要解释的符号才会说明。
5.
示例步骤按如下方式列举，除非另有说明。
(1)
示例
(2)
关键运算
(3)
显示
0GS9216190////
