background image

9

TAKING CARE OF THE PRODUCT

When the dust-disposal warning lamp(Red) and sound indicate

Dust cup (Removing each component)

1

2

Clean of the dust cup set also in the following cases

(Red: Blinking)

peep, peep

Dust

disposal

(Red : Blinking)

Take the following measures

Page 9

11

The filter is blocked up and the suction power has been reduced.

Stop operation and disconnect the power plug.

Empty the dust cup, clean of the cylindrical 

filter and the high efficiency air filte

r

.

If you continue to use the product without cleaning, it will come 

to a stop automatically.

 Wait at least 2 minutes before restarting your cleaning operation.

  (If you restart the cleaning operation within 2 minutes, the warning sound may beep.)

 The suction power gets reduced.

 Operation noises are changed or increased.

 The unit's body gets hot.

 

Foreign objects are tangled in the cylindrical filte

r.

 You are worryed about the dirtiness of the dust cup.

 The bottom lid of the dust cup is hard to open.

 

The product has suctioned fine powde

r.

Removing the filter cove

r

.

Turn the cup cover in the 

direction of arrow,

Remove  the  cup 

cover.

Shift the lock in the 

direction of release.

Removing the high efficiency air filte

r

.

 Do not try to grasp the 

  grid element to remove 

 

the filte

r. 

(

There is a risk 

  of injuries.

)

Removing the cup cover

.

Remove it.

EC-S2142,S2141.indd   9

12.5.8   2:58:20 PM

Summary of Contents for EC-S2141













Reviews: