eCopy ShareScan OP Installation and Setup Guide
|
7
Installing the UPDD driver
Overview
To enable the touch screen on the ScanStation, you must install the Universal Pointing Device
Driver (UPDD). If you are installing on an existing ScanStation, you may not need to calibrate the
touch screen.
Installing the UPDD driver
To install the driver:
1
Insert the eCopy ShareScan OP CD (Disk 1) in the drive.
2
When the launch screen appears, click
Drivers
and then click
Explore Touchscreen Drivers
.
3
Open the folder that corresponds to your operating system (Win2K or XP) and then run
Setup.exe
.
4
Click
Next
.
5
In the License Agreement window, read the agreement and then click
Next
.