manualshive.com logo in svg

Sharp e-Copy ShareScan OP 3.0, Configuration Manual

Share
Download
Sharp e-Copy ShareScan OP 3.0 Configuration Manual Download Page 53

eCopy ShareScan OP Configuration Guide 

|

 47

Configuring general settings for connectors

About configuring general settings for connectors

Each connector displays its own configuration settings in the eCopy ShareScan OP administration 
console.

General configuration settings apply to all connectors. You configure these settings on the Display, 
Advanced, and Tracing tabs. When you finish configuring the settings, you save them in a 
connector profile (see “Understanding connector profiles” on page 11).

For information about connector-specific settings, refer to the appropriate section in this guide, or 
select the connector in the console tree and then click the 

Connector Help

 button on the toolbar.

This section also provides information about the Search while typing function, which many 
connectors use.

Configuring the Display settings

The Display tab specifies the image and label that will be used on the connector button on the 
client screens.

  

 

Summary of Contents for e-Copy ShareScan OP 3.0

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands