manualshive.com logo in svg

Sharp e-Copy ShareScan OP 3.0, Configuration Manual

Share
Download
Sharp e-Copy ShareScan OP 3.0 Configuration Manual Download Page 125

eCopy ShareScan OP Configuration Guide 

|

 119

Configuring the Fax via Print connector

About configuring the Fax via Print connector

The Fax via Print connector enables users to fax documents from an eCopy-enabled device by 
sending the scanned document to a third-party fax driver. The fax driver then displays its own 
user interface, if any, on the ScanStation client. Some fax drivers display an e-mail client.

You must configure the ScanStation client to use the hard keyboard (see “Configuring the 
keyboard” on page 43). This is because the soft keyboard does not support third-party fax driver 
interfaces.

Before configuring this connector, install the desired fax driver on the ScanStation.

Note:

This connector is not available on devices running an embedded eCopy client.

Summary of Contents for e-Copy ShareScan OP 3.0

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands