Gett
ing Sta
rted
1
1-
4
Charging Battery
Battery must be inserted in handset to
charge it.
Use specified AC Charger
ZTDAA1
(sold separately) only.
.
In this guide, ZTDAA1 is referred to as
"AC Charger."
.
Handset and AC Charger may warm
while charging.
1
Open Port Cover as shown
2
Insert Charger Connector
.
With arrows up, insert connector
until it clicks.
3
Extend blades and plug AC
Charger into AC outlet
.
Small Light illuminates red while
charging.
.
Small Light goes out when battery
is full.
4
Unplug AC Charger
.
Pull AC Charger straight out.
5
Disconnect handset
.
Squeeze Charger Connector
release tabs and pull straight out
to remove.
6
Fold back blades and
replace Port Cover
Charging Battery
Charging Battery Outside Japan
.
Disney Mobile is not liable for
problems resulting from charging
battery abroad.
AC Charger
External Device
Port
Charger
Connector
Release Tabs
Port Cover
Arrows
Small Light
AC 100V Outlet
Blades
AC Charger
When Small Light Flashes
.
Battery is unchargeable; may be
defective or simply at the end of its
life; replace it.
Important AC Charger Usage Note
.
Fold back blades after charging. Do
not pull, bend or twist the cord.