Sharp DIGITAL LASER COPIER/PRINTER Operation Manual Download Page 41 | Manualshive

Page: 41 / 63

Sharp DIGITAL LASER COPIER/PRINTER Operation Manual Download Page 41

STORING, EDITING, AND DELETING FROM THE TOUCH PANEL

40

The following steps are for deleting a one-touch
key.

6

Touch the [DELETE] key.

7

Touch the [YES] key.

If you wish to delete
another one-touch key,
repeat steps 3, 6, and 7.

PROGRAMMING A GROUP KEY

Scan to E-mail and Internet-Fax destinations that have been stored in one-touch keys can be stored in group keys.
Up to 500 destinations can be stored in a group key.
To program a group key from the Web page, refer to

page 7

.

1

Press the [CUSTOM SETTINGS] key, touch

the [ADDRESS CONTROL] key, and then

touch the [DIRECT ADDRESS/PROGRAM]

key (refer to steps 1 to 3 on

page 37

).

2

Touch the [GROUP] key.

3

Follow steps 6 through 12 of "Storing one-

touch keys" (

pages 37 to 38

) to enter a

GROUP NAME, INITIAL, and INDEX.

4

Touch the [ADDRESS] key.

5

Touch index keys and the

keys as

needed, and then touch one-touch keys of

the destinations that you wish to store in

the group.

One-touch keys that have been touched are
highlighted.

DELETE

EXIT

1/2

T-FAX

DELETE THE ADDRESS?

SHARP CORPORATION

NO

YES

NOTES

If you cannot edit or delete a one-touch key

If you attempt to edit or delete a one-touch key in the following situations, a warning message will appear and
editing/deletion will not be possible. At this time, cancel the transmission or wait until it is completed, delete the
key from the group or the program, or cancel or change the hyperlink e-mail address.

The one-touch key you wish to edit or delete is currently being used for transmission or is used in a currently

stored transmission job.

The one-touch key is included in a group key or a program key.
The one-touch key is included in a group of end receiving machines for an F-code relay broadcast operation.
The one-touch key is used for a hyperlink e-mail address for Scan to FTP.

Destinations for Scan to FTP and Scan to Desktop that are stored in one-touch keys cannot be edited or deleted
from the touch panel of the machine. Use the Web page to edit or delete these destinations. (

page 6

)

DIRECT ADDRESS/PROGRAM

INDIVIDUAL

GROUP

STORE

AL

S

EX

USER 2

ADDRESS

AME

DIRECT ADDRESS / GROUP

SELECT ADDRESS.

A

FREQUENT USE

ABCD

EFGHI

JKLMN

OPQRST UVWXYZ

ABC

GROUP

OK

1/2

* 0

C GROUP

SHARP CORPORATION

CORPO.TPS

ADDRESS REVIEW

DIRECT ENTRY

«
...
39
40
41
42
43
...
»

Summary of Contents for DIGITAL LASER COPIER/PRINTER
































































Reviews:

No comments