10
Using the Control Panel
Startup
To power on the copier, use the power switch located on the top left side of the copier
(see Figure F). At each power up, the AR-P15 takes approximately 5 minutes to initialize.
Before the AR-P15 is ready, the following screen is displayed if you press the PRINTER/
NETWORK button on the Control Panel.
When the AR-P15 is ready, the message “Printer is under preparation...” disappears.
Online/Offline
To use the Control Panel LCD for certain AR-P15 functions, such as printing test pages,
you must take the AR-P15 offline before you perform the function, and then put the
AR-P15 back online when you are done.
When the AR-P15 is online, it can receive data over the network from a networked
computer. When the AR-P15 is offline, it cannot receive data over the network from a
networked computer.
Icons on the Control Panel LCD indicate ON LINE/OFF LINE status. To change
AR-P15 status, touch the appropriate icon. See the following procedures.
PRIVATE
Printer is under preparation...
