Sharp AR-FX11 Operation Manual Download Page 51 | Manualshive

Page: 51 / 116

background image

49

TRANSMISSION USING F-CODES

4

When communication occurs involving a box, the communication will only take place if the sub-address and
passcode that the other machine sends match the sub-address and passcode programmed in your machine for that
box. Therefore, to allow communication, you must inform the other party of the sub-address and passcode of the
box. Likewise, to send a fax to a box in another machine or use polling to retrieve a document from a box, you must
know the sub-address and passcode of that box. (Note that assigning names simply makes it easier to manage
boxes; you do not need to inform the other party of a box name.) However, you must inform the other party of the
sub-address and passcode for a box.
This machine uses the term "sub-address" for the location of the memory box and the term "passcode" for the
password that allows communication; however, other fax machines of other manufacturers may use different terms.
When asking the other party for a sub-address and passcode, you may find it useful to refer to the 3-character
alphabetical terminology used by the ITU-T.

CREATING A BOX FOR F-CODE TRANSMISSION

F-code operations that use boxes include F-code polling memory (page 50), F-code confidential transmission (page
55), and F-code relay broadcast transmission (page 58).
A box is created by programming a name for the box, and up to 10 boxes for each operation type can be created.

The information programmed in each box varies slightly depending on the type of operation. For
information on programming, editing, and deleting boxes, see "PROGRAMMING, EDITING, AND DELETING
F-CODE MEMORY BOXES" on page 74.

After you have programmed a box, inform the other party of the box's sub-address and passcode.

Your machine

ITU-T

F-code polling memory box

F-code confidential box

F-code relay broadcast function

Sub-address

SEP

SUB

SUB

Passcode

PWD

SID

SID

If you attempt to create a box when 10 boxes have already been created for that operation type, a
message will appear and you will not be able to create the box. Delete any unused boxes and then
create the new box. (See "

PROGRAMMING, EDITING, AND DELETING F-CODE MEMORY BOXES" on

page 74.)

Note

Pegasus-E_Fax_Ex.book 49

ページ

２００４年１０月１８日　月曜日　午後８時４１分

«
...
49
50
51
52
53
...
»

Summary of Contents for AR-FX11





















































































































Reviews:

No comments

Related manuals for AR-FX11

Brand: Viper Pages: 93

LAVINA ELITE 3213EHV

Brand: Superabrasive Pages: 42

Brand: HIGHLEAD Pages: 35

Brand: Janome Pages: 26

Brand: Baby Lock Pages: 2

Memory Craft 200E

Brand: Janome Pages: 54

WERTARBEIT N 656D Free Arm

Brand: W6 Pages: 102

Mikasa MVH-200DA

Brand: MULTIQUIP Pages: 64

INNOVATECH P550Y

Brand: Bartell Pages: 20

Brand: Singer Pages: 42

Brand: Muratec Pages: 91

Brand: Kärcher Pages: 240

Brand: Canon Pages: 224

Brand: Brother Pages: 12

Brand: Brother Pages: 25

IntelliFax-2840

Brand: Brother Pages: 88

Brand: Brother Pages: 2

Brand: Brother Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands