Sharp AR-C260 Operation Manual Download Page 64

Page: 64 / 140

LARGE CAPACITY TRAY

3-16

Loading paper

The large capacity tray will automatically lower when the tray runs out of paper.

Press the paper tray control button on the
large capacity tray.

The button lamp will
blink while the feed table
is lowering and will go
out when the tray is
ready to be opened.

When the button lamp goes out, pull the
paper tray out.

Do not pull the paper tray out before the button
lamp goes out.

Fan the copy paper.

Load the paper onto the feed table.

●

Be sure to load paper
appropriate for the
large capacity tray.
See page 3-15.

●

Do not exceed the
maximum height line.

Gently push the large capacity tray back
into place.

The paper tray control
button lamp will blink as
the feed table returns to
the feed position and will
light up steadily when it
is in position to feed.

Maximum
height line

00-08.book 16

ページ

２００２年１１月８日　金曜日　午前９時３９分

Summary of Contents for AR-C260













































































































































Search results

Summary of Contents for AR-C260

Reviews:

Related manuals for AR-C260

Brands by name

Popular brands

Sharp AR-C260, Operation Manual

Search results

Summary of Contents for AR-C260

Reviews:

Related manuals for AR-C260

Brands by name

Popular brands