Sharp AR-BC320, Operation Manual, Page: 93 / 140

REDUCTION/ENLARGEMENT/ZOOM
5-15
5
XY ZOOM
The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed independently.
If this feature is selected, the copy ratios can be set from 25% or 45% to 400%.
Example: Selecting 100% for the length and 50% for the width
1 Place the original in the document feeder
tray or on the document glass. (pages 4-6
to 4-9)
2 Touch the [COPY RATIO] key on the touch
panel.
3 Touch the [XY ZOOM] key.
4 Touch the [X] key.
5 Use the reduction, enlargement, and
ZOOM ([
], [ ]) keys to change the
copy ratio in the horizontal (X) direction.
A fixed ratio key will not
become highlighted
when touched.
The zoom keys can be
used to change the ratio
from 45% to 400% in
increments of 1%.
Touch the [
] key to
increase the ratio, or the
[
] key to decrease
the ratio. If you continue
to touch either key for 3
seconds, the ratio
begins to change
quickly.
6 Touch the [Y] key.
Original
Copy
AUTO 8½x11
PAPER SELECT
100 %
COPY RATIO
PLAIN
5½x8½
READY TO COPY.
100
ZOOM
%
77
%
64 %
121
%
129 %
XY ZOOM MENU AUTO IMAGE
2 1
0
OK
100
%
ORIGINAL
PAPER SELECT
COPY RATIO
AUTO
EXPOSURE
AUTO
AUTO 8½x11
11x17
8½x14
11x17
8½x11 8½x14
8½x11
8½x11
5½x8½
8½x14 11x17
8½x11 11x17
5½x8½ 8½x11
100
100
ZOOM
%
%
%
Y
A
X
1
4
%
%
2
NOTE
Touch a reduction key or an enlargement key to set
the approximate ratio, then touch the [
] key to
decrease the ratio or [ ] key to increase the ratio.
ZOOM
Y
A
64 %
50 %
XY ZOOM
100
50
ZOOM
%
%
%
Y
A
X
1
4
%
%
2
XY ZOOM
CANCEL
100
50
ZOOM
%
%
%
Y
A
X
1
4
%
%
2
XY ZOOM
AN EL
WhaleII_general-copy_SEC.book 15 ページ ２００４年９月１４日 火曜日 午前１１時４５分