Sharp AR-BC260 Operation Manual Download Page 150

Page: 150 / 184

INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)

Select the printer driver being installed as
the default printer and click the [Next]
button.

When the printer name window appears,
click the [Next] button.

If you wish to change the printer name, enter the
desired name.

When you are asked if you wish to install
the display font, select an answer and
click the [Next] button.

Check the contents of the window and
click the [Next] button.

Installation of the printer driver begins.

When the finish setup window appears,
click the [OK] button.

Click the [Close] button.

This completes the installation.

NOTE

When you are using Windows 2000/XP/Server
2003

If a warning message regarding the Windows logo
test or digital signature appears, be sure to click the
[Continue Anyway] or [Yes] button.

NOTE

A message prompting you to restart your computer
may appear after installation is finished. If this
message appears, click [Yes] to restart your
computer.

apollonII_inst_sec.book 8

ページ

２００４年９月１０日　金曜日　午前８時５２分

Summary of Contents for AR-BC260

























































































































































































Search results

Summary of Contents for AR-BC260

Reviews:

Sharp AR-BC260, Operation Manual, Page: 150 / 184

Search results

Summary of Contents for AR-BC260

Reviews: