manualshive.com logo in svg

Sharp AR-BC260, Operation Manual, Page: 105 / 184

Share
Download
Sharp AR-BC260 Operation Manual Download Page 105

SPECIAL MODES

6-9

6

Covers

The COVERS mode is used to place covers on the front, back, or both the front and back of multipage documents.
This function can only be used when the originals are placed in the document feeder tray of the reversing single pass
feeder. (The document glass cannot be used.)

■

■

■

■

Copying onto a cover

■

■

■

■

Not copying onto a cover

1

Touch the [COVERS] key on the SPECIAL
MODES screen.

The COVERS setting
screen will appear.
The covers icon (

,

etc.) will also appear in
the upper left of the
screen to indicate that
the function is turned on.

2

Select cover placement.

Select [FRONT], [BACK] or [FRONT+BACK] on
the touch panel.

One-sided originals

Back cover 
(no copying)

Front cover 
(can copy onto front side)

One-sided copies 
(copying onto a cover)

Two-sided originals

SHARP

SHARP

Cover original

1

2

3

4

1

2

3

4

3

4

5

1

2

Cover original

SHARP

Back cover 
(no copying)

Front cover 
(can copy onto front side)

SHARP

1

2

3

4

5

One-sided originals

Two-sided copies 
(copying onto a cover)

Two-sided originals

2

3

4

1

Cover original

SHARP

Two-sided copies from one-sided or two-sided originals

One-sided copies from one-sided or two-sided originals

1

2

3

4

SHARP

Cover original

2

3

4

1

SHARP

Back cover 
(no copying)

Front cover 
(can copy onto front side) 
(Back side of cover is blank)

Selections for front cover, back cover, or front and back
cover can be made.
Back cover sheets cannot be copied on, either on the
front side or on the back side.

2

3

4

1

Back cover

Front cover 

(not copying onto a cover)

One-sided originals

Two-sided originals

1

2

3

4

1

2

3

4

4

1

2

3

Front cover 

One-sided originals

Two-sided originals

1

2

3

4

4

1

2

3

One-sided copies from one-sided or two-sided originals

Two-sided copies from one-sided or two-sided originals

Back cover

One-sided copies 
(not copying onto a cover)

One-sided copies 
(not copying onto a cover)

Selections for front cover, back cover, or front and back
cover can be made.

ERASE

COVERS

OK

CANCEL

OK

COVERS

SPECIAL MODES

FRONT

BACK

FRONT+BACK

PRINT ON FRONT COVER?

YES

NO

ApollonII_general-copy_SEC.book  9 

ページ

  

２００４年９月６日　月曜日　午後４時５７分

Summary of Contents for AR-BC260

























































































































































































Reviews:

No comments