Sharp AQUOS SH-02L, Instruction Manual

Page: 82 / 242

Entering touch-tone signals
When using services in which you are required to enter
numbers additionally during a call, such as inquiry about
the balance in your bank account or ticket reservation,
enter pause (,)/wait (;) after entering a phone number to
make a call with an additional number added to the main
phone number.
„
Adding 2 seconds pause
After making a call to a main phone number, the handset
automatically pauses for 2 seconds and an additional
number is sent.
1
In the standby screen, enter a phone
number ▶
#
(for at least 1 second)
2
Enter a number to send ▶
s
„
Adding wait
After making a call to a main phone number, the handset
automatically waits and then a screen asking whether to
send an additional number is displayed. Select [Yes] to
send an additional number.
1
In the standby screen, enter a phone
number ▶
*
(for at least 1 second)
2
Enter a number to send ▶
s
3
[Yes] during the call
Making a call with Speed dial
You can make a call quickly to the other party who is
registered to the speed dial.
z
Register a contact in advance (
☞
P. 91 "Adding
contacts to phonebook").
„
Registering Speed dial
1
In the standby screen,
z
▶ [Phone] ▶
[Speed dial]
2
Select [＜Not registered＞] of any number
to register ▶ select a contact
„
Dialing with speed dial
1
In the standby screen, enter a number of
speed dial (0 - 99) ▶
s
z
If multiple phone numbers are registered in a
contact, a screen for selecting call number appears.
z
To display the speed dial list, enter a unregistered
speed dial number in the standby screen and then
press
s
. You can make a call by selecting a contact
from the speed dial list, or register a new speed dial.
z
When a mail address is registered to the contact of
speed dial, mail can be created by entering the speed
dial number in the standby screen and then pressing
m
.
80
Call