Sharp AQUOS SH-02L, Instruction Manual

Page: 193 / 242

Settings for use overseas
Data roaming
Set whether to use data communication when roaming.
z
To perform packet communication overseas, set Data
roaming to [ON].
1
In the standby screen,
z
▶ [Settings] ▶
[Network] ▶ [Mobile network] ▶ [Data
roaming]
2
[ON]/[OFF]
z
When the confirmation screen is displayed, check
the content and select [OK].
Preferred network mode
You can check a network to use.
1
In the standby screen,
z
▶ [Settings] ▶
[Network] ▶ [Mobile network] ▶ [Preferred
network mode]
2
Select an item
„
4G/3G/GSM(Auto) : Automatically switch to
available network.
„
3G/GSM : Use 3G/GSM/GPRS network.
„
GSM : Use GSM/GPRS network.
Network operator settings
The handset searches available network to switch it
automatically by default setting. To switch network
manually, set in the following steps.
1
In the standby screen,
z
▶ [Settings] ▶
[Network] ▶ [Mobile network] ▶ [Select
automatically] ▶ [OFF]
z
A search is made for available networks and the
results are displayed.
2
Select a network operator
Date & time
If [Automatic date & time] and [Auto timezone] of Date
& time are enabled, the handset receives information on
time and time differences from the network of a
connected overseas network operator, then time and
time differences are corrected.
z
Time and time differences may not be adjusted
correctly depending on the network of an overseas
network operator. In this case, set time zone manually.
z
The correction timing may differ depending on the
network operator.
z
For details on Date & time
☞
P. 164 "Date & time"
191
International Roaming