185
International Roaming
Network operators
At the time of purchase, the handset is set to automatically
search for and switch to available networks. When you want to
manually switch networks, set by performing following
operations.
1
In the home screen, [ ]
▶
[Settings]
▶
[More]
▶
[Cellular networks]
▶
[Network operators]
z
If the confirmation screen for data communication is
displayed, check the content and select [OK].
z
Search for networks and a list of network operators is
displayed.
z
When an error occurs during the network search, disable
[Data enabled] (
P. 153 “Cellular networks”) and try
again.
2
Select a network operator
z
To search for network operators again: [Search networks]
z
To automatically select a network operator: [Select
automatically]
Date & time
If [Automatic date & time] and [Auto timezone] of Date & time
are enabled, the handset receives information on time and
time differences from the network of a connected overseas
network operator, then time and time differences are corrected.
z
Time and time differences may not be adjusted correctly
depending on the network of an overseas network operator. In
this case, set time zone manually.
z
The correction timing may differ depending on the network
operator.
z
For details on Date & time
Inquiries
z
When the handset or the docomo nano UIM card is lost or stolen
overseas, promptly contact DOCOMO and conduct a procedure
for canceling the use of service from your country of stay. Refer
to the last page for inquiries. You can also cancel the use of
service from My docomo. Note that call/communication charges
after the handset or the docomo nano UIM card is lost or stolen
are incurred to the subscriber.
z
As for land-line phone etc., “International call access number” of
your country of stay or “Universal number international prefix” is
required.
