Sharp Aquos LC-42BT10U, Operation Manual, Page: 7 / 61

Supplied accessories
Make sure the following accessories are provided with the product.
NOTE
• Always use the AC cord supplied with the TV.
QUICK REFERENCE
Remote control unit (
g
1)
“AAA” size battery (
g
2)
Page 8
AC cord
(
g
1)
Page 7
Hole cover
(
g
1)
Page 6
Cable clamp (
g
2)
Cable tie (
g
1)
Page 7
Operation manual
(
g
1)
Remove the hole cover from
the backing. Firmly affi x the hole cover to the
cabinet hole on the bottom of the
TV.
1 2
Affi xing the hole cover
This TV type is designed to be hung on a wall. Affi x the supplied hole cover to the TV cabinet hole by following the
instructions below. Place the TV on a soft cushion.
3
6
Setting the TV on the wall
CAUTION
• This TV should be mounted on the wall only with the AN-37AG2 (SHARP) wall mount bracket. The use of other
wall mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the TV requires special skill that should only be performed by qualifi ed service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
Using a SHARP recommended bracket to mount the TV
• You can ask a qualifi ed service professional about using a SHARP recommended AN-37AG2 bracket to mount the TV to the
wall.
• Carefully read the instructions that come with the bracket before beginning work.
NOTE
• Detach the cable clamps on the rear of the TV when using the SHARP recommended mount bracket.
Hanging on the wall
AN-37AG2 wall mount bracket.
(See the bracket instructions for details.)
Vertical mounting Angular mounting
About setting the TV angle
0° or 5°