Display reports regarding failures and changes for timer
settings.
You can check the current version of the software on the
screen.
68
Appendix
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Press
a
/
b
to select “Reset”, and then press
ENTER
.
4
Press
c
/
d
to select “Yes”, and then press
ENTER
.
• “Now, TV will restart automatically. OK?” displays
on the screen.
6
Press
MENU
and the MENU screen displays.
1
Press
c/d
to select “Setup”.
2
Press
c
/
d
to select “Yes”, and then press
ENTER
.
• “Now initialising...” displays on the screen and
blinks.
• After the reset has completed, the power shuts
off and then comes back on. The screen will have
returned to its original settings.
7
Reset
Receiver report
If you have already set the password, enter it
here.
• “Return to factory pre-settings” displays on the
screen.
5
Information
Message list
When a new broadcast station is detected, the message is
updated in the “Message list” of the “Information” menu.
Press
a
/
b
to select the desired language
listed on the screen, and then press
ENTER
.
Press
c
/
d
to select “HOME” or “STORE”,
and then press
ENTER
.
8
10
Press
c/d
to select “Digital search” or
“Analogue search”, and then press
ENTER
.
• When the country setting is set to “Australia”, only “Digital
search” is available.
11
The TV searches for, sort and stores all the
receivable TV stations according to their
settings and the connected antenna.
• To abort the initial auto installation in progress, press
RETURN
.
NOTE
• When the TV is in “STORE” mode, repeat steps 1 to 8 to change to
“HOME” mode.
Download setup
The TV automatically determines whether a new software
version is available when the TV is in standby mode.
Go to “Menu”
s
“Setup”
s
“View setting”
s
“Individual
setting”
s
“Standby search”
s
“Download setup”.
Selected item
Description
Yes
Automatically searches for new software
updates available when the TV is in
standby mode.
No
Does not search for update information.
Now
Checks if there is new software
immediately.
Downloading the software
You can select the method of update.
Selected item
Description
Yes
Starts downloading immediately. It takes
approximately one hour to update. You
cannot carry out other operations while
downloading.
• Cancels the download by pressing
ENTER
on the remote control unit when
“Discontinue” is displayed on the screen
during the update.
No
Starts downloading automatically several
minutes after entering standby mode.
NOTE
• The TV must remain in standby mode for download.
• Updating the software may take some time.
Press
b/c/d
to select “View setting”.
3
Now initialising...
After factory presetting,
TV will restart automatically
Identifi cation
If the software is updated, the confi rmation
message “New download information has
been detected.” appears.
• If the TV receives the update service while in
standby mode, a confi rmation message displays
after turning on the power.
1
Follow the screen prompts.
2
9
Setting the country.
Press
a
/
b
to select your country or area, and
then press
ENTER
.
• This setting screen only appears during the initial auto
installation.
NOTE
• If there are unread messages in the “Message list”, “New
information” is displayed on “Channel display”. (See page 20.)
40LE820X_en_au.indd 68
40LE820X_en_au.indd 68
2010/06/18 16:13:02
2010/06/18 16:13:02
