manualshive.com logo in svg

Sharp Aquos LC-32LE600E, Service Manual

Share
Download
Sharp Aquos LC-32LE600E Service Manual Download Page 1

 

OUTLINE

This model is based on the LC-32LE700E/RU/S, LC-40LE700E/RU/S, LC-46LE700E/RU/S and is changed some
parts. This Service Manual covers the modifications alone. For the other points, refer to the LC-32LE700E/RU/S,
LC-40LE700E/RU/S and LC-46LE700E/RU/S (No. S89B4LC32L700) Service Manual.

SERVICE MANUAL

Parts marked with "

" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the

safety and performance of the set.

This document has been published to be used for
after sales service only.
The contents are subject to change without notice.

OUTLINE AND DIFFERENCES FROM BASE MODEL

OUTLINE.............................................................i
DIFFERENCES FROM BASE MODEL..............ii

SAFETY PRECAUTION

IMPORTANT SERVICE SAFETY PRE-
CAUTION ...........................................................v
Precautions for using lead-free solder ..............vi
End of life disposal ........................................... vii

CHAPTER 1. SPECIFICATIONS

[1] SPECIFICATIONS ......................................... 1-1

CHAPTER 2. OPERATION MANUAL

[1] OPERATION 

MANUAL .................................. 2-1

CHAPTER 3. DIMENSIONS

[1] DIMENSIONS ................................................ 3-1

CHAPTER 4. ADJUSTMENT PROCEDURE

[1] ADJUSTMENT 

PROCEDURE ....................... 4-1

CHAPTER 5. TROUBLESHOOTING TABLE

[1] TROUBLESHOOTING 

TABLE ....................... 5-1

CHAPTER 6. MAJOR IC INFORMATIONS

[1]  MAJOR IC INFORMATIONS.......................... 6-1

CHAPTER 7. OVERALL WIRING/SYSTEM BLOCK 
DIAGRAM

[1]  OVERALL WIRING DIAGRAM (LC-

32LE600E/RU/S) ...........................................7-1

[2]  OVERALL WIRING DIAGRAM (LC-

40LE600E/RU/S) ...........................................7-2

[3]  OVERALL WIRING DIAGRAM (LC-

46LE600E/RU/S) ...........................................7-3

[4]  SYSTEM BLOCK DIAGRAM (LC-

32LE600E/RU/S) ...........................................7-4

[5]  SYSTEM BLOCK DIAGRAM (LC-

40LE600E/RU/S) ...........................................7-5

[6]  SYSTEM BLOCK DIAGRAM (LC-

46LE600E/RU/S) ...........................................7-6

CHAPTER 8. PRINTED WIRING BOARD ASSEM-
BLIES

[1] MAIN 

UNIT ....................................................8-1

CHAPTER 9. SCHEMATIC DIAGRAM

[1]  DESCRIPTION OF SCHEMATIC DIA-

GRAM ............................................................9-1

[2] SCHEMATIC 

DIAGRAM ................................9-2

Parts Guide

TopPage

CONTENTS

LC-32/40/46LE600E/RU/S (1st Edition)

No. S89B5LC32L600

MODELS

LC-32LE600E/RU/S
LC-40LE600E/RU/S
LC-46LE600E/RU/S

LCD COLOUR TELEVISION

In the interests of user safety (required by safety regulations in some countries) the set should be restored to its

original condition and only parts identical to those specified should be used. 

Summary of Contents for Aquos LC-32LE600E

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands