46
Useful adjustment settings
DNR (Digital Noise Reduction)
Produces a clearer video image.
Press
MENU
and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
2
Press
a
/
b
to select “DNR”, and then press
ENTER
.
3
Press
a
/
b
to select the desired level, and
then press
ENTER
.
4
Off
High
Low
Input source
Input 1
Input 2
Selectable item
Input (Auto), Input (COMPONENT),
Input (S-VIDEO), Input (VIDEO),
Output
Auto, COMPONENT, VIDEO
Input Select
Selecting input source
Can use for selecting the input source.
Using TV/VIDEO on the remote control unit or on
the TV
TV/VIDEO
allows you to choose from the available
input sources.
Press
MENU
and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
2
Press
a
/
b
to select “Input Select”, and then
press
ENTER
.
3
Press
TV/VIDEO
on the remote control unit
or
TV/VIDEO
on the TV to select the input
source.
• An image from the selected source automatically
displays.
• You can also select the input source by pressing
a
/
b
.
2
Selecting input signal type
For setting the signal type of external equipment.
Press
TV/VIDEO
on the remote control unit or
TV/VIDEO
on the TV.
1
Press
a
/
b
to select an input source among
“Input 1” and “Input 2”, and then press
ENTER
.
4
Press
a
/
b
to select the desired level, and
then press
ENTER
.
5
NOTE
•
If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment for
the signal type.
• When the signal type is set to “Auto”, the input terminal
where cable is connected is automatically selected.
• When the signal type is set to “Auto” and multiple video
signal cables are connected, the signal type is selected in
the following prioritised order:
Input 1: COMPONENT
s
S-VIDEO
s
VIDEO
Input 2: COMPONENT
s
VIDEO
• When the signal type for “INPUT5” is set to “DIGITAL” or
“ANALOGUE”, a “PC” or “AV” signal is automatically detected.
• When Input 1 is set to “Output”, Input 1 will become video out
function.
D53X_en_g.indd 46
D53X_en_g.indd 46
2007-7-31 11:29:06
2007-7-31 11:29:06