Sharp Aquos LC-32A33X, Operation Manual, Page: 50 / 68

48
Connecting a PC
Selecting the input resolution
• Some input signals may have to be registered manually to
display properly.
• The pairs of input signals (resolutions) in the list below are
not distinguishable when received. In such case, you have
to set the correct signal manually. After setting once, it will
display when the same signal (resolution) is input again.
1024 x 768 1360 x 768
NOTE
• You can only select the “Input Signal” on the Setup menu
when receiving one of the 2 input signals listed above.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
2
Input resolution settings
Press
a
/
b
to select “Fine Sync.”, and then
press ENTER .
3
Press
a
/
b
to select the desired input signal
on the display, and then press ENTER .
5
V-Position
H-Position
Auto Sync.
Input Signal
Clock
Phase
Reset
1024 x 768
Select desired item
1360 x 768
Press
a
/
b
to select “Input Signal”, and then
press ENTER .
4
(Example)
32A33X_en_g.indd 48 32A33X_en_g.indd 48 2008-1-4 20:16:26 2008-1-4 20:16:26