GB
-3
Quick guide
Setting the TV
NOTE
Unplug the AC cord from the LCD TV set and power outlet when the LCD TV set is not to be used for a long period of time.
Please ensure your 75-ohm coaxial cable is fitted with a DIN 45325 (IEC169-2) coaxial plug and plug it into the antenna terminal at the
rear of the LCD TV set (antenna cable not supplied).
•
•
75-ohm coaxial cable
(round cable)
To antenna terminal ( )
Removing the terminal
cover
Pull down the hooks to open the
cover.
Round lock for
Kensington Security
Standard slot*
* Using the Kensington Lock
This LCD TV set has
a Kensington Security
Standard slot for use with
a Kensington MicroSaver
Security System. Refer to the
information that came with
the system for instructions on
how to use it to secure the
LCD TV set.
•
Antenna terminal ( )
AC INPUT terminal
(220-240 V)
Rear view
Place the TV close to the
AC outlet, and keep the
power plug within reach.
How to Fix the Cables
Secure cables and cords with the supplied
cable tie so that they do not get caught when
mounting the cover.
Cable tie
How to Prevent the LCD TV Set from Falling Over
To prevent the LCD TV set from falling over in case of earthquakes
and so on, strap it onto the wall by threading one end of the string
through the hook on the LCD TV set (
①
) and fastening the LCD TV set
with the string attached to the hook on the wall or the post, etc. (
②
).
(An example of strapping the LCD TV set onto the wall is shown
below.)
The string and hook are commercially available.
•
2
①
(For Europe, except
U.K. and Eire)
(For U.K. and Eire)
AC cord
