background image

LC-20S5U

In the interests of user-safety (Required by safety regulations in some countries) the set should be restored
to its original condition and only parts identical to those specified should be used.

MODEL

LC-20S5U

This document has been published to be used for
after sales service only.
The contents are subject to change without notice.

LCD COLOR TELEVISION

CONTENTS

»

IMPORTANT SERVICE SAFETY PRECAUTION ......................................................................................... 2

»

SPECIFICATIONS ........................................................................................................................................5

»

OPERATION MANUAL .................................................................................................................................6

»

DIMENSIONS ...............................................................................................................................................8

»

REMOVING OF MAJOR PARTS .................................................................................................................. 9

»

ADJUSTING PROCEDURE OF EACH SECTION ..................................................................................... 13

»

PUBLIC MODE SETTING PROCEDURE ..................................................................................................25

»

TROUBLE SHOOTING TABLE .................................................................................................................. 30

»

MAJOR IC INFORMATIONS ...................................................................................................................... 34

»

BLOCK DIAGRAM ...................................................................................................................................... 36

»

OVERALL WIRING DIAGRAM ................................................................................................................... 38

»

DESCRIPTION OF SCHEMATIC DIAGRAM ............................................................................................. 40

»

SCHEMATIC DIAGRAM

Ë

INVERTER Unit .......................................................................................................................................41

Ë

MAIN Unit ................................................................................................................................................. 42

Ë

SUB Unit .................................................................................................................................................. 58

Ë

R/C, LED Unit .......................................................................................................................................... 70

»

PRINTED WIRING BOARD ASSEMBLIES ................................................................................................71

»

REPLACEMENT PARTS LIST .................................................................................................................... 86

»

PACKING OF THE SET .............................................................................................................................. 99

Page

S26R7LC20S5U/

Summary of Contents for Aquos LC-20S5U














































































Reviews: