5/16/2018
Sharp operation manual
file:///W:/11_IM%20GROUP/Oversea%20Group/SHARP%20JAPAN/2018/JC180177_8KTV_html/HTML/html_E1/index.html?page=3-01.html
1/1
Contents
1.
2.
3.
4.
5.
6.
Operating the Monitor
Using a PC (IP control)
7.
8.
You can select an OSD language from among 7
languages.
Ver. 1.01
Menu Operation
List of Setup Menu Items
AQUOS LINK setup
Menu item name
Setup
AQUOS LINK control
On, Off
Set it to "Off" if the power supply is turned on or the channel changes
automatically when connecting a device that is not AQUOS LINK-enabled.
Auto power on
Yes, No
Set it to turn on automatically once an AQUOS LINK-enable device is
operated.
Select AQUOS LINK
device
Select an AQUOS LINK device.
Selecting
channel
key
INPUT1
Auto, On, Off
When you set "Selecting channel key" to "On", you can perform AQUOS
recorder operation with the remote control.(
For "Auto", a device operates in the same manner as it does when this is set
to "Off". Only when there is a request from a connected device however, it will
operate in the same manner as it would when this is set to "On".
INPUT2
Auto, On, Off
INPUT3
Auto, On, Off
INPUT4
Auto, On, Off
Audio return channel
Auto, Off
"ARC (Audio Return Channel)" is the function to transmit sound from the
Monitor to the AV amplifier, etc. using an HDMI cable. If you set "Audio return
channel" to "Auto", you can connect to an ARC compatible audio device with
a HDMI cable. This function is available only when it is connected to INPUT 2
terminal.
You can also setup from the Application menu (page
)
3-32
