5/16/2018
Sharp operation manual
file:///W:/11_IM%20GROUP/Oversea%20Group/SHARP%20JAPAN/2018/JC180177_8KTV_html/HTML/html_E1/index.html?page=3-01.html
1/1
Contents
1.
2.
3.
4.
5.
6.
Operating the Monitor
Using a PC (IP control)
7.
8.
You can select an OSD language from among 7
languages.
Ver. 1.01
Troubleshooting
If You Suspect a Problem
General
What if
Where to check
Reference page
You cannot operate the buttons on the remote
control or Monitor
It may be attributable to external or interference noises. Set the "Power button setting" to "Mode2", turn off the Monitor with its
power button, leave it alone for about a minute after unplugging the power plug, and then plug the power plug back in again to
turn its power on.
Isn't the RC control lock set to On? If it has been set to On by mistake, in the Setup menu, select "
(Ecology)" - "Child
Lock", and then set it to "Off". (When using buttons on the Monitor, see page
―
You can also check video for child lock.
―
You hear a crack sometimes
It is a sound of the cabinet slightly expanding or contracting with changes in temperature. It has no impact on performance, etc.
―
7-6
