12
When Connecting Using Telnet
1
Click “Start” from the Windows desktop and select “Run”.
2
Enter “telnet 192.168.150.2” in the text box that opens up.
(If the IP address of the unit is 192.168.150.2.)
3
Click “OK”.
4
“User Name:” is displayed. Input the user name and press the return key.
(If a user name has not yet been set, just press the return key.)
5
“Password:” is displayed. Input the password and press the return key.
(If a password has not yet been set, just press the return key.)
6
Input “setup” and press the return key.
|
SETUP MENU will be displayed.
S E T U P M E N U
[1]IP Address
[2]Subnet Mask
[3]Default Gateway
[4]User Name
[5]Password
[6]RS-232C Baud Rate [7]Unit Name
[A]Advanced Setup
[D]Disconnect All
[V]View All Setting
[S]Save & Quit
[Q]Quit Unchanged
setup>
•
If the IP address has been changed, be sure to enter the correct IP address.
•
User name and password are not set in the initial settings.
•
If the user name or password is entered incorrectly three times, SETUP MENU will be quit.
http://www.usersmanualguide.com/
