Sharp 679 User Manual Download Page 68

Page: 68 / 219

PCL

Menu item

Description

Font Source

Resident*

All

Choose the source which contains the default font selection.

Font Name

[List of available fonts]

Select a font from the speciﬁed font source.

Symbol Set

[List of available symbol set]

Specify the symbol set for each font name.

Note:

A symbol set is a set of alphabetic and numeric characters,

punctuation, and special symbols. Symbol sets support the different
languages or speciﬁc programs such as math symbols for scientiﬁc text.

Pitch

0.08–100 (10*)

Specify the font pitch for scalable monospaced fonts.

Note:

Pitch refers to the number of ﬁxed

‑

space characters in a horizontal

inch of type.

Orientation

Portrait*

Landscape

Specify the orientation of text and graphics on the page.

Lines per Page

1–255

Specify the number of lines of text for each page printed through the PCL®
datastream.

Notes:

•

This menu item activates vertical escapement that causes the
selected number of requested lines to print between the default
margins of the page.

•

60 is the U.S. factory default setting. 64 is the international factory
default setting.

PCL5 Minimum Line Width

1–30 (2*)

Set the initial minimum stroke width.

Notes:

•

Jobs printed in 1200 dpi use the value directly.

•

Jobs printed in 4800CQ use half the value.

PCLXL Minimum Line Width

1–30 (2*)

A4 Width

198 mm*

203 mm

Set the width of the logical page on A4

‑

size paper.

Note:

Logical page is the space on the physical page where data is

printed.

Auto CR after LF

Off*

Set the printer to perform a carriage return after a line feed control
command.

Note:

Carriage return is a mechanism that commands the printer to move

the position of the cursor to the ﬁrst position on the same line.

Auto LF after CR

Off*

Set the printer to perform a line feed after a carriage return control
command.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus

Summary of Contents for 679




























































































































































































































Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands

Sharp 679, User Manual

Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands