Sharp 679 User Manual Download Page 47

Page: 47 / 219

Scanning to an FTP server

Load the original document into the ADF tray or on the scanner glass.

From the home screen, touch

FTP

, and then enter the needed information.

If necessary, conﬁgure other FTP settings.

Send the FTP job.

Scanning to a ﬂash drive

Load an original document into the ADF tray or on the scanner glass.

Insert the ﬂash drive.

Touch

Scan to USB

and adjust the settings if necessary.

Note:

If the USB Drive screen does not appear, then touch

USB Drive

on the home screen.

Scan the document.

Warning—Potential Damage:

To avoid loss of data or printer malfunction, do not touch the ﬂash drive or

the printer in the area shown while actively printing, reading, or writing from the memory device.

Scanning

Summary of Contents for 679




























































































































































































































Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands

Sharp 679, User Manual

Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands