Sharp 679 User Manual Download Page 23

Page: 23 / 219

•

Load envelopes with the ﬂap facedown on the left side.

•

Load European envelopes with the ﬂap facedown and entering the printer ﬁrst.

Warning—Potential Damage:

Do not use envelopes with stamps, clasps, snaps, windows, coated linings,

or self

‑

stick adhesives.

From the control panel, set the paper size and paper type to match the paper loaded.

Linking trays

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Settings

Paper

Tray Conﬁguration

Set the same paper size and paper type for the trays that you are linking.

Save the settings.

Note:

You can also change the settings from the printer control panel.

To unlink trays, make sure that no trays have the same paper size and paper type settings.

Warning—Potential Damage:

The temperature of the fuser varies according to the speciﬁed paper type. To

avoid printing issues, match the paper type setting in the printer with the paper loaded in the tray.

Loading paper and specialty media

Summary of Contents for 679




























































































































































































































Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands

Sharp 679, User Manual

Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands