Sharp 679 User Manual Download Page 179

Page: 179 / 219

Action

Yes

Step 5

Check if the cables connecting the printer and the computer are
inserted to the correct ports.

Are the cables inserted to the correct ports?

Go to step 6.

Insert the cables to
the correct ports.

Step 6

Install the correct print driver.

Is the printer responding?

The problem is
solved.

Go to step 7.

Step 7

Turn off the printer, wait for about 10 seconds, and then turn on the
printer.

Is the printer responding?

The problem is
solved.

Contact your

dealer

Adjusting toner darkness

From the home screen, touch

Settings

Print

Quality

Adjust the toner darkness.

Apply the changes.

Job prints from the wrong tray or on the wrong paper

Action

Yes

Step 1

Check if you are printing on the correct paper.

Print the document.

Is the document printed on the correct paper?

Go to step 2.

Load the correct
paper size and paper
type.

Step 2

Depending on your operating system, specify the paper size
and paper type from the Printing Preferences or Print dialog.

Note:

You can also change the settings on the printer control

panel. From the home screen, touch

Settings

Paper

Tray

Conﬁguration

Paper Size/Type

Make sure that the settings match the paper loaded.

Print the document.

Is the document printed on the correct paper?

The problem is
solved.

Go to step 3.

Troubleshooting

179

Summary of Contents for 679




























































































































































































































Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands

Sharp 679, User Manual

Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands