Sharp 679 User Manual Download Page 170

Page: 170 / 219

Action

Yes

Step 4

Check if the print resolution is set to 600 dpi.

From the control panel, navigate to:

Settings

Print

Quality

Print Resolution

Print the document.

Is the print light?

Go to step 5.

The problem is
solved.

Step 5

Check the status of the toner cartridge, and replace if necessary.

From the control panel, navigate to:

Status/Supplies

Supplies

Print the document.

Is the print light?

Contact your

dealer

. The problem is

solved.

Mottled print and dots

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non

‑

touch

‑

screen printer models, press

navigate through the settings.

Action

Yes

Step 1

Check if the printer is using a genuine and supported toner
cartridge.

Note:

If the cartridge is not supported, then install a

supported one.

Print the document.

Is the print mottled?

Go to step 2.

The problem is
solved.

Step 2

Check the printer for leaked toner contamination.

Is the printer free of leaked toner?

Go to step 3.

Contact your

dealer

Troubleshooting

170

Summary of Contents for 679




























































































































































































































Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands

Sharp 679, User Manual

Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands