Sharp 679 User Manual Download Page 13

Page: 13 / 219

Using the control panel

Use the

Display

•

View the printer messages and supply status.

•

Set up and operate the printer.

Home button

Go to the home screen.

Numeric keypad

Enter numbers or symbols in an input ﬁeld.

Power button

Turn on or turn off the printer.

Note:

To turn off the printer, press and hold the power button for ﬁve seconds.

Clear all or Reset button Reset the default settings of a function such as copying, faxing, or scanning.

Stop or Cancel button

Stop the current printer task.

Start button

Start a printer task, depending on which mode is selected.

Pause button

Place a dial pause in a fax number.

Backspace button

Move the cursor backward and delete a character in an input ﬁeld.

Indicator light

Check the printer status.

Volume buttons

Adjust the speaker volume.

Understanding the status of the power button and
indicator light

Indicator light

Printer status

Off

The printer is off or in Hibernate mode.

Blue

The printer is ready or processing data.

Red

The printer requires user intervention.

Power button light

Printer status

Off

The printer is off, ready, or processing data.

Solid amber

The printer is in sleep mode.

Blinking amber

The printer is in hibernate mode.

Learning about the printer

Summary of Contents for 679




























































































































































































































Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands

Sharp 679, User Manual

Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands