Sharp 679 User Manual Download Page 122

Page: 122 / 219

Maintaining the printer

Warning—Potential Damage:

Failure to maintain optimum printer performance, or to replace parts and

supplies, may cause damage to your printer.

Adjusting the speaker volume

Adjusting the default internal speaker volume

The speaker volume will reset to default value after the session is logged out, when the printer wakes from
Sleep or Hibernate mode, or after a power

‑

on reset.

From the control panel, navigate to:

Settings

Device

Preferences

Audio Feedback

Select the volume.

Note:

If Quiet Mode is enabled, then audible alerts are turned off.

Conﬁguring the fax speaker settings

From the home screen, touch

Settings

Fax

Fax Setup

Speaker Settings

Do the following:

•

Set the Speaker Mode to

Always On

•

Set the Speaker Volume to

High

•

Activate the Ringer Volume.

Networking

Note:

For information on installing the wireless network adapter, see the setup sheet that came with the

adapter.

Connecting the printer to a Wi

‑

Fi network

Make sure that Active Adapter is set to Auto. From the home screen, touch

Settings

Network/Ports

Network

Overview

Active Adapter

From the home screen, touch

Settings

Network/Ports

Wireless

Setup On Printer Panel

Choose

Network

Select a Wi

‑

Fi network, and then type the network password.

Note:

For Wi

‑

network

‑

ready printer models, a prompt for Wi

‑

Fi network setup appears during initial

setup.

Maintaining the printer

122

Summary of Contents for 679




























































































































































































































Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands

Sharp 679, User Manual

Search results

Summary of Contents for 679

Reviews:

Related manuals for 679

Brands by name

Popular brands