Sharp 29H-FX3P, Operation Manual

Page: 10 / 67

E 9
Watching TV
Watching a TV programme
Simple operations for watching a TV programme.
With the number buttons (on remote control)
• To select a one-digit channel, such as 5, press
5
.
If “5-” is indicated, press to select one-digit input, and then
press
5
again.
• To select a two-digit channel,
such as 15, press to
select the two-digit input. Press
1
, and then press
5
.
• When the Standby indicator is red, either
CH
/
CH
on the TV can be pressed to turn on
the power.
• The channel number is displayed in green for channels tuned by auto tuning and displayed in yellow for
channels tuned using fine tuning.
• When the Standby indicator is red, the TV is in Standby mode and power is still supplied to the TV. If
you will not watch TV for a while, turn off the main power by pressing
POWER
on the TV set. Also, if
you will not be at home for a considerable length of time, unplug the cord from the outlet.
• The AV1 (or SAV1), AV2 (or COMPONENT) and AV3 (or SAV3) input channels can be selected using
TV/VIDEO
.
• Channels that have been skipped cannot be selected by
CH
/
CH
. See
22
.
• The on-screen displays in this manual may differ from their actual appearance.
1
Turn on power.
• When the Standby indicator is off, press
POWER
.
• When the Standby indicator is red, press
POWER
on the remote
control. The Standby indicator changes to green and a picture
appears.
2
Select channel.
With
CH
/
CH
• Press
CH
and channels change as shown below.
1
/
2
/
...
/
98
/
99
/
AV1 (or SAV1)
/
AV2 (or COMPONENT)
/
AV3 (or SAV3)
/
0
/
1
/
2 ...
• Press
CH
and channels change as shown below.
1
/
0
/
AV3 (or SAV3)
/
AV2 (or COMPONENT)
/
AV1 (or SAV1)
/
99
/
98
/
...
/
2
/
1
/
0 ...
3
Adjust volume using
/ .
• The volume bar disappears
approximately five seconds
after the volume has been
adjusted.
CH
CH
1
5
POWER
– –
– 1
5 1
V O L UME 1 9
POWER
Standby indicator
TV Set (Bottom)
TV Set (Top)
CH
CH
29H-FX3P(01-10)EN 15/3/05, 4:16 PM 9