Sharp Shape USB3D, Assemble Manual

Page: 1 / 8

1
Sharp Shape
12891 Lantana Avenue
Saratoga, CA 95070
not just any shape
www.sharpshape.com Tel & Fax : 408-871-1798
Assemble the Sharp Shape USB3D Foot Scanner
Sharp Shape, Copyright ©, All rights reserved. July 2014
Figure 1. The Foot Scanner
The Sharp Shape 3D Laser Foot Scanner, model
USB3D, is an improved version of the previous
model, 2V. This manual is about assembly
instructions. The software instructions and
operational instructions are described in the PDF
document “Install and Operate USB3D Foot
Scanner”.
For shipping purposes, the scanner comes in
separate body and parts boxes. The scanner
needs to be assembled before you can use it.
Figure 1 on the left illustrates the completed foot
scanner.
The scanner is composted of a body (the top
black box) and an adjustable stand (the
mechanism that supports the body). A special
horizontal stand is also used, but it is used in rare
cases. Please contact us for details if you are
interested in that.
Warning: do not power the scanner before
removing the two parking screws! The screws
are used to block the movement of the cart
during shipping. They are located at the back
of the scanner.
Contents in the packages may vary from time to
time, depending on the availability of parts at our
hands.