420 774 335 397 www.sharks-shop.cz Stránka 21
GENERAL SAFETY INSTRUCTIONS
●
The pump is connected with waterproof plug and installed according to regulations. The plug must
have a supply voltage of 230V/50Hz. Fuse min. 6 A.
●
The input voltage must match the voltage that is indicated on the instrument labels or in this manual.
●
The pump must not be used if they are water people.
●
Due to leaks (leaks) of oil may become contaminated liquid.
Attention! (Important for your own safety)
Before operation of your new submersible pump, please let specialist to check the grounding, neutral
●
Event RCD must comply with the relevant safety regulations and must work flawlessly.
●
It must be avoided at all costs aggressive liquids, as well as handling abrasive materials.
●
Motor submersible pump must be protected from frost.
●
The pump must be protected from running "dry".
●
The pump can not be used for other liquids than clean water.
●
Never hang the pump power. cable or by using a cable tamper always hang him for hanging loops
(2).
●
Make sure that instead of power. connection is located in a space which can be occupied or the
connection is protected from moisture. Plug and power cord is required before connecting inspected
for mechanical damage.
1) Working environment
●
Work only in daylight or good artificial light. Never use the tool without good visibility.
●
Keep the work area clean.
●
Do not use near flammable liquids or gases.
2) Electrical safety
●
Never any way modify the plug and power cord. Keep it away from heat, dirt, sharp edges and
moving parts.
●
Avoid body contact with grounded surfaces such as pipes, radiators, cookers and refrigerators. This
increases the risk of electric shock.
●
Never move the device by pulling on the cable or disconnect it this way from the mains.
●
If you use the device outdoors, use an extension cord suitable for outdoor use (RCD).
●
The pump must be fed through the RCD, having a nominal residual tripping current not exceeding
30 mA.
●
When using power tools need to follow the instructions to avoid the risk of electrical shock, injury or
fire. Read and follow these instructions.
Before disconnecting the power supply, make sure the device is turned off and an extension cord.
3) Personal safety
●
Work with pump and reason. Observe these warning labels and instructions.
●
Do not use the pump if you are tired or under the influence of alcohol, medication or drugs. People
who are not familiar with the guidelines, children and adolescents must not use the pump.
●
Avoid accidental starting. When storing or transmitting machine pump must be disconnected from
the mains.
●
Before turning on the machine, remove all adjusting tools.
4) Power tool use and care
●
Use pump only for the purposes described in this manual.
●
Use the device only for the purposes for which it was designed.
●
Before any work on the device, disconnect the pump from the electrical grid.
●
Never leave the instrument unattended.
●
Never allow children to use this device. The pump is not a toy, keep it away from children.
●
Keep children and pets away from the pump. Keep other persons during operation of the pump at a
safe distance.
●
Anyone who operates the pump must be familiar with the guidelines.
●
Pump Keep out of the reach of children.
●
Make sure the pump is in good condition and complete. If you have any questions please contact
the service Sharks.
●
Do not use the pump if it is not complete or is damaged.