11
8. Various Installation Positions
8.1 Power Supply
on the Case Bottom
Cool air is drawn from underneath the case
and transported to the rear out of the housing
as waste heat. The air circulation of the power
supply is largely separated from the air circula-
tion in the rest of the case. Here, the use of the
Zero RPM mode is particularly recommended
as the air intake is only needed for cooling the
power supply, and the fan rotation can be stop-
ped for noiseless operation over longer periods.
When necessary, the fan delay mode provides
additional dissipation of warmth from the power
supply when the system is turned off.
8.2 Power Supply
Underneath Top Panel
Warm air is drawn in from the inside of the ca-
sing and transported to the rear out of the case.
The air circulation of the power supply is com-
bined with the air circulation in the rest of the
case. When the Zero RPM mode is off, air circu-
lation in the upper part of the case is provided,
effectively cooling voltage regulators of water
cooling systems, for example. Since the heat
level in the entire housing is constantly raised,
the use of the fan delay mode is particularly re-
commended. This helps to protect all installed
components and increase their service life.
Summary of Contents for SilentStorm Cool Zero 650
Page 1: ...Manual...