ASSEMBLY
WHAT’S INSIDE
MAINTENANCE
QUICK START GUIDE
POWERED
LIFT-AWAY ®
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
Insert wand into
motorized floor nozzle.
Press top dust
cup release latch
to access dust
screen and remove
built-up debris
as required.
Use a coin to
open the 3 locks
on the bottom of
the floor nozzle.
Remove any string,
carpet fibers, or
hair that may be
wrapped around
the brushroll.
When finished,
shut the lid, then
close the 3 locks.
Lift the hinged
lid to access
brushrolls.
Pre-Motor (foam and felt):
With the dust cup removed, take out the foam and felt
filters and rinse them with water.
Post-Motor (HEPA):
To access the HEPA filter, reach under the grill and pull the
latch to remove the grill. Remove and rinse the HEPA filter.
Place pod onto wand and
slide down to connect.
Connect hose to back of
pod, pressing until it clicks
into place. Store accessories
on the posts on the pod.
Insert handle into wand.
1
(Click)
2
(Click)
3
(Click)
4
(Click)
Empty dust cup after each use
TIP:
Wash filters every
3 months to keep
the suction strong.
Rinse filters with
water only and allow
them to air-dry
completely. Tap loose
dirt from foam filters
as needed between
washes.
Easy brushroll maintenance
Cleaning Filters
Pull up on
dust cup
release latch
and lift dust
cup off pod.
Hold dust cup over a
trash bin and press the
empty-release latch
on the bottom.
HEPA
Felt filter
Foam filter
Filter
Filter Access
A
Motorized Floor Nozzle
B
Wand
C
Handle
D
Crevice Tool
E
Upholstery Tool
F
TruePet® Mini Motorized Brush
C
B
A
F
D
E
