background image

10

11

Ordering Replacement Parts

PART 

PART NO.

1  

Steam Pocket Kit 

XT3501BZ

  - Rectangle Cleaning Pad
  - Steam Duster Pad  
  - Triangle Cleaning Pad

1

ORDERING REPLACEMENT PARTS

To order additional parts and 
accessories, feel free to contact us at 

??????????????

Troubleshooting Guide

PROBLEM

POSSIBLE REASONS & SOLUTIONS

The Steam Mop 

will not turn on.

Your Steam Mop should be securely plugged into a  
127V electrical outlet only.  

Check your fuse or breaker.

If your unit still doesn’t work, give us a call at 

????????????.

Steam Mop will not 

make steam.

Prime the pump, see page 4 for more information.

Is there water in the water tank? If not, add water to your 
Steam Mop following the instructions. 

Steam Mop leaves 

water on the floor.

Check to see if your micro-fiber cleaning pocket is too wet. 
We recommend you unplug the Steam Mop and change the 
micro-fiber cleaning pocket.

Make sure the steam pocket is attached correctly.

Steam Mop is hard 

to push.

Make sure the steam pocket is attached correctly.

Check to see if your pocket is excessively dirty.

Try increasing the height of the pole for better leverage.

Floors are cloudy, 

streaky or spotty  

after steaming.

The micro-fiber pocket might be dirty. Flip or change 
the pocket.

If you washed the pocket with powder detergent then the 
pocket might be ruined.

If you are cleaning in a kitchen area where there might be a 
build-up of grease then use a degreasing agent such as an 
all-purpose cleaner or dish soap and paper towels to clean 
the area first.

You might have left the mop in the same spot for 
too long.

Do you have hard water? If you do you, we recommend 
switching  to distilled water.

S3501BR_11_100505_ENG.indd   10-11

10-05-05   10:30 AM

Summary of Contents for S3501BR11












Reviews: