10
MAINTENANCE
PROBLEM
There is no steam.
The nozzle leaves water drops
on the garment.
Gurgling/Inconsistent Steam Flow
Unit won’t turn on.
SUGGESTED SOLUTION
1
Make sure the unit is plugged in and turned on.
2
The water tank might be empty, add water.
3
The water cap is not fully pushed in, press the cap down and turn clockwise
to secure tightly making sure the arrows are aligned.
1
Make sure the steam bonnet is attached to the nozzle.
2
The steam bonnet could be too wet, remove the bonnet and let it dry
before reusing.
3
The steam hose is bent, straighten the hose to eliminate condensation
build up.
1
The hose may be bent trapping steam or condensation. Simply straighten
the hose to eliminate condensation build up.
2
In portable usage the unit must be level to the floor with the hose extended
to generate continuous steam.
1
Make sure the unit is plugged in and turned into the “I” position.
To order any of the above replacement parts, go to
www.sharkclean.com
or call
1-800-798-7398
.
CLEANING & STORING
1
Turn the steamer off “0” and
unplug from the electrical outlet.
Let the steamer cool for 30
minutes and empty the water
from the tank.
2
Hang the steam nozzle on the
cradle.
3
Collapse the telescoping pole
for compact storage. Wipe the
exterior of the steamer with
a damp cloth and wipe dry if
needed.
REPLACEMENT PARTS
A
100SDL
Bristle Brush Frame
B
XPD300
Steam Bonnet
4
Store the steamer in a cool
dry place.
5
We recommend to remove the
steam hose from the steam unit
and turn the water tank upside
down over the sink to empty any
excess water once a week. This
will prolong the life of the garment
steamer.
TROUBLESHOOTING GUIDE & REPLACEMENT PARTS
