9
1-800-798-7398
Intelligent Steam Control
®
The
Shark
®
Lift-Away
®
Pro Steam Pocket
®
Mop
has 3 unique Intelligent Steam Control settings so you can use
the right amount of steam for the cleaning task at hand. See below for tips on when to use each setting.
TO SANITIZE* WITH THE STEAM MOP USING THE INTELLI-MOP
™
HEAD AND THE DIRT GRIP
™
PAD:
1
Attach a clean Dirt Grip pad to the mop head.
2
Plug in the unit and press the Steam Control Button to select the
SCRUB
Setting.
3
Wait 30 seconds for the unit to begin producing steam.
4
Start mopping on an appropriate sealed hard floor surface with a forward and backward motion. After three minutes,
your unit is ready to be used to sanitize.
5
Using a forward and backward motion, move the unit over the area you seek to sanitize. Repeat at least 15 times.
* Sanitization studies were conducted under controlled test conditions. Household conditions and results may vary.
With the Intelli-mop head only in SCRUB mode. Not in above floor mode or when using Steam Blaster.
SETTING
IDEAL FOR THESE SEALED
SURFACES
RECOMMENDED USAGE
DUST
LIGHT STEAM
Laminate
Hardwood
Marble
Cleaning delicate surfaces
Light cleaning and dusting
Loosening and lifting light dirt
MOP
NORMAL STEAM
Hardwood
Marble
Tile
Stone
Cleaning most surfaces and large areas
Basic, everyday cleaning
Removing spots and smaller messes
Cleaning moderate and heavy-traffic areas
SCRUB
HEAVY STEAM
Hardwood
Marble
Tile
Stone
Deep-cleaning and cleaning hard-to-clean surfaces
Tough cleaning and removing stuck-on messes and stains
Deep-cleaning heavy-traffic areas
Cutting through heavy dirt and grime
Sanitizing* floors
Steam Blaster
™
For an extra burst of steam, you can use the Steam Blaster feature in DUST, MOP, or SCRUB.
Follow the instructions found on the “Using your Steam Pocket Mop” page.
