M1B1 ShareVgo Smart Folding Exercise Bike
9
Step 4 – Monitor
1
4-1
13
1
4-2
4-1
: Open the cover at the back of Monitor (1), install
the 2 AAA batteries into the slot and then close the
cover.
4-2:
Remove the 2 pre-installed Screws (13) from the
back of the Monitor (1).
4-3
: Attach the Monitor (1) to the
front
of the
Monitor Plate (12) using 2 Screws (13).
4-4
: Connect the Sensor Wire (17) to the Monitor
Sensor Wire (1a) and make sure it is properly
connected. Plug the Handle Pulse Jack (6) into the
Pulse Port at the back of Monitor (1).
TIGHTEN ALL NUTS, BOLTS, AND SCREWS AT
THIS TIME.
