8
The camera will be turned on automatically when drone is on when powered by J30J-15.
It is recommended that the power supply voltage be 13-48 v DC. When the camera is
working, the instantaneous power of the power supply must be more than 15W to ensure
the normal operation of the device.
Steps
：
（
1
）
Mount the 6100 Pro on the drone, and make sure the installation is firm
；
（
2
）
Turn on the drone, the camera will start automatically and enter the self-test. The
total startup duration of the camera will be 40 S, during startup, the blue indicator blinks
quickly. After startup, the camera beeps and the blue indicator blinks slowly
；
（
3
）
After startup, camera can take photos now
；
（
4
）
Do not turn off drone till 15 seconds after last photo was taken;
（
5
）
It is recommended that you connect the camera power after UAV startup is
completed, to avoid frequent camera restart caused by frequent on-off of the UAV.
3.2 Take Photo
DJI Pilot App of DJI M300 RTK
Pic 6 DJI M300 RTK Pilot Screen
Take working with DJI M300RTK as an example, camera is on, t
he left bottom
window shows the real-time image. As the indoor light is insufficient and the image is
black. User can press the ‘photo’ button on controller to test the photo function.