7
3.Camera Operation
3.1 Power On
3.1.1 Power by DJI SkyPort, turn on automatically when drone is on.
steps of power on:
（
1
）
Mount the 6100 Pro on the drone, and make sure the installation is firm
；
（
2
）
Turn on the drone, the camera will start automatically and enter the self-test. The
total startup duration of the camera will be 40 S, during startup, the blue indicator blinks
quickly. After startup, the camera beeps and the blue indicator blinks slowly
；
（
3
）
During startup, the real-time data window on the Pilot screen displays "Unable to take
photos", and "Available to take photos" after startup.
Pic 5 Pilot Real-Time Screen
Pilot Real-time Data Display:
Display
Meaning
Remark
1
Photo
Camera is turned on, it
can capture normally
2
RTK
RTK status
0 -- no solution,
16 -- single point solution
34 -- floating point solution
50 -- fixed solution
3
Receive trigger
times
The trigger times that
camera received
The camera should execute
shutter times
4
D
Actually shutter times of
the camera
5
RTK Flag, SD
/
/
（
4
）
During the startup of the camera, a time setting or camera setting interface will
appear on the photo transmission interface. At this time, the camera initialization will
automatically switch this interface. After the startup is complete, the photo transmission
image display will enter the photo taking interface.
3.1.2 Power by J30J-15